Publicidad
Idiomas disponibles
Idiomas disponibles
HOWTOUSZ 29
HOW TO USE
Operafing
the dryer
Lint
Filter
CLEAN THE LiNT FILTER
If the lint filter has not already been cleaned, lift out the filter and remove tile
lint from the last load. This will help ensure the fastest and most efficient
drying
performance.
LOAD THE DRYER
Load the dryer with tile wet laundry from tile washer. If the load is extra large,
you may need to divide it into smaller loads for proper performance
and fabric
ca re.
TURN ON THE DRYER
Press tile POWER button
to turn on the dryer. The cycle LEDs will illuminate
and a signal will sound, if turned on. Refer to page 10.
SELECT A CYCLE
Press tile CYCLES button
until tile indicator
for the desired cycle is lit.
The preset temperature,
dry level, and option
settings for that cycle will be
shown. Default settings for the selected cycle can now be changed if desired.
Refer to the Cycle settings and options
page for details.
-_NOTE
Not all options
or modifiers
are available
on all cycles. Refer to the Cycle
guide page for default settings
and allowable
options. A different
chime will
sound and the LED will not come on if the selection
is not allowed.
BEGIN CYCLE
Press the START/PAUSE button
to begin the cycle. The cycle can be paused at
any time either by opening
the door or by pressing the START/PAUSE button.
If
the cycle is not restarted within
4 minutes, the dryer will shut off and the cycle
settings will be lost.
END OF CYCLE
When the cycle is finished, the chime will sound if it is set. Remove your
clothing
from the dryer immediately
to reduce wrinkling.
If WRINKLE CARE
is selected, the dryer will tumble
briefly every few minutes to help prevent
wrinkles
from setting in the clothes.
Publicidad
