Descargar Imprimir esta página

LG DLG1002W Manual De Instrucciones página 34

Ocultar thumbs Ver también para DLG1002W:

Publicidad

Idiomas disponibles

Idiomas disponibles

34
MAINTENANCE
MAINTENANCE
Regular
cleaning
_WARNING
To reduce the risk of fire, electric shock, or injury
to persons when using this appliance, follow
basic
precautions,
including
the following:
• Unplug
the dryer before cleaning to avoid the risk
of electric shock. Failure to follow this warning can
cause serious injury, fire, eJectricaJ shock, or death,
• Never use harsh chemicals,
abrasive cleaners, or
solvents
to clean the washer. They wi[[ damage the
finish.
Cleaning the exterior
Proper care of your dryer can extend its life,
The outside of the machine can be cleaned with warm
water and a mild, nonabrasive
household
detergent,
Immediately
wipe offany
spills with a soft, damp cloth,
i
NOTE
o not use methylated
spirits, solvents, or similar
roducts to clean the dryer.
ever use steel wool or abrasive cleansers; they can
amage the surface of the dryer
Cleaning the interior
Wipe around the door opening and seal with a soft,
damp cloth to prevent lint and dust buildup
that could
damage the door seal.
Clean the window
with a soft cloth dampened
with
warm water and a mild, nonabrasive
household
detergent;
then wipe dry.
The stainless steel drum can be cleaned with a
conventional
stainless steel cleaner, used according
to
the manufacturer's
specifications.
Never use steel wool or abrasive cleansers; they can
scratch or damage the surface.
Cleaning around
and under the dryer
Vacuum lint and dust from around the dryer and
underneath
it regularly. Vent ductwork
should be
checked for lint buildup
and cleaned at least once per
year. If any noticeable
reduction
in airflow or drying
performance
occurs, immediately
check ductwork
for
obstructions
and blockages.
Maintaining
ductwork
Vent ductwork
should be checked for lint buildup
once
per month and cleaned at least once per year. If any
noticeable
reduction
in airflow or drying
performance
occurs, immediately
check ductwork
for obstructions
and blockages.
Contact a qualified
technician
or
service provider.
Cleaning the tint filter
Always clean the lint from the filter after every cycle.
Lint
Filter
To clean, open the dryer door and pull the lint filter
straight
up. Then:
1. For everyday cleaning,
roll any lint off the filter with
your fingers, or
2. Vacuum the lint filter
3. If the lint filter has become very dirty or clogged
with fabric softener, wash the lint filter in warm,
soapy water and allow to dry thoroughly
before
reinstalling.
(- @ NOTE
h
_NEVER operate the dryer without
the lint filter in

Publicidad

loading

Este manual también es adecuado para:

Dle1001w