Record Settings - Abus TVAC15000C Manual De Instrucciones

English
Use the ◄► buttons to select the desired
Pairing = add camera
camera and confirm your choice with OK. The
systems starts a 60 second countdown.
During the 60 seconds, press the PAIRING
button on the camera cable until the green LINK
LED on the front of the camera starts to flash.
Once the connection is successful, the LINK
LED on the camera lights up continuously
and the monitor switches to live view.
Use the ◄► buttons to select between the
Resolution = image resolution
resolutions
640 × 480 and 320 × 240. Confirm your input
with OK.
Note that the recording time changes for the
different resolutions.

7.4 Record settings

Use the ◄► buttons to select the desired alarm
Alarm Period =
length of alarm when motion is detected duration.
You can choose between OFF/5 sec/10 sec/15
sec. Confirm your selection with OK.
The alarm duration is set to 5 seconds by
default.
Press any button to switch off the alarm when it
sounds.
Use the ◄► buttons to select the recording
Motion Detection =
recording duration for motion detection duration for motion detection.
You can choose between OFF/5 sec/10 sec/15
sec.
Confirm your input with OK.
The recording duration is set to 5 seconds by
default.
Motion detection is deactivated for 5 seconds
after an alarm.
19