Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
The following table gives problems and actions that you
can perform if your machine does not operate correctly.
WARNING: Switch the machine off and remove the
battery prior to any troubleshooting.
Symptom
Possible causes
Battery is not
charged. LED
light is not on.
Pump is
Sprayer will not
over heated,
turn on when
damaged, or
power button is
non-functional.
pressed.
Tank is already
pressurized
so the pump
is turned off
automatically.
No liquid is in
tank.
Shut-off is
clogged
Sprayer turns
on but will not
Nozzle is
spray.
clogged.
Pump is not
attached tightly
to the tank
Tank has
not been
pressurized yet.
Air leaking from
Sprayer turns
tank at seal.
on but only
sprays at a low
Tank seal is
pressure.
damaged.
Shut-off is
clogged.
Nozzle is
clogged.
Cracked,
swollen or faulty
Hose leaks at
hose.
the tank
Damaged
connection.
20V Yard Sprayer
Hose leaks at
the shut-off.
Solution
Charge Pump
Poor Spray
Allow the
Performance
battery to cool
down. Replace
Pump if it is
damaged or non-
functional.
Depress the
lever to see
if the sprayer
DECLARATION OF
starts spraying.
CONFORMITY
Add liquid to
We,
tank.
Positec Germany GmbH
Clean the shut-
Postfach 32 02 16, 50796 Cologne, Germany
off
Declare that the product
Clean the
Description Battery operated sprayer
nozzle..
Type WG829E WG829E.X (82-designation of machinery,
representative of sprayer)
Tighten pump to
Function spraying liquids
tank.
Complies with the following Directives:
Allow time
2006/42/EC
for pump to
2011/65/EU&(EU)2015/863
pressurize tank
2014/30/EU
(at least 20
seconds).
Standards conform to
EN 62841-1, EN 50580, EN IEC 55014-1,
Tighten pump to
EN IEC 55014-2, EN IEC 63000
tank.
The person authorized to compile the technical file,
Replace tank
Name: Marcel Filz
seal.
Address: Positec Germany GmbH
Clean the shut-
Postfach 32 02 16, 50796 Cologne, Germany
off
Clean the
nozzle.
Replace shut-off
assembly.
2020/12/25
Replace shut-off
Allen Ding
assembly.
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd.
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China
Cracked,
Replace shut-off
swollen or faulty
assembly.
hose.
Damaged
Replace shut-off
connection.
assembly.
Tank has
not been
Turn on pump.
pressurized yet.
Nozzle is
Clean the
partially
nozzle.
clogged.
Nozzle is
Replace the
damaged.
nozzle.
Shut-off is
Clean the shut-
clogged
off
13
EN
Publicidad
