Printing From A Gsm Mobile Phone Camera - Sagem PHOTO EASY 150 Manual Del Usuario

P DPOF (D P O F )
RINT IN IGITAL RINT RDER ORMAT MODE
This function lets you select the photographs to be printed on your camera, then print them on the
SAGEM PHOTO EASY 150 printer from a memory card. Your camera must comply with the
DPOF (Digital Print Order Format) standard. Refer to your camera documentation to find out if
it is compatible with this standard.
Select the required photographs on the camera (follow the instructions in the documentation of
your camera).
Remove the memory card from the camera and insert it into the correct slot of your SAGEM
PHOTO EASY 150 printer. This starts the data transfer. The DPOF logo on the printer screen is
activated and the number of printable photographs is displayed in the lower left-hand corner of
the screen.
Warning -
Example: memory card that contains 15 photographs selected for printing.
Start printing by pressing the key.
To exit DPOF mode, press the key.
C
To switch back to DPOF mode, press and hold the key down for 3 seconds.
C
P GSM
RINTING FROM A MOBILE PHONE CAMERA
Photographs taken with a GSM mobile phone equipped with a camera can be printed on the
SAGEM PHOTO EASY 150 printer. To do this, the photographs need to be transferred to the
printer via an IR (infrared) link between the 2 devices.
Switch on the SAGEM PHOTO EASY 150 printer (press " I " on the on/off switch).
Tips -
GSM mobile phones with cameras work on low definition ; for a better quality of print
we suggest you print 2 or 4 photos per sheet.
Place your GSM mobile phone opposite the SAGEM PHOTO EASY 150 printer so that the IR
"windows" are facing each other and are not more than 30 centimetres apartPlace your GSM.
- 15 -