Insert A Film Cartridge - Sagem PHOTO EASY 150 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 86
Switch on the printer. Wait 10 seconds for the printhead to lift, then:
1 - Open the external flap located on the right-hand side of the printer.
2 - Remove the protective foam.
3 - Take the new ribbon out of its packaging and make sure that the film is stretched after removing the
card (A).
4 - Install the ribbon in the position shown in the illustration below.
5 - Lift the locking lever and push in the film cartridge until it touches the back of the compartment the
locking lever must be locked after insertion.
6 - Close the external flap.
Warning -
inserted into the printer. Check that the green locking lever is correctly lowered.
Remark:
In the event of any difficulty, check that there are no foreign objects in the film cartridge compartment.
I
NSERT A FILM CARTRIDGE
Never touch the film cartridge with your fingers. Make sure the cartridge is completely
- 4 -
A
6

Publicidad

Tabla de contenido
loading

Tabla de contenido