FIG. 4
Connect and set the amplifier as shown in Fig. 4 if it is to be controlled by a car radio with
stereo receiver and separate subwoofer output and used with stereo satellite
loudspeakers and a subwoofer.
(1) To the car radio, left output
(2) To the car radio, right output
(3) To the car radio, subwoofer output
(4) Left satellite loudspeaker
(5) Right satellite loudspeaker
(6) Subwoofer
FIG. 5
2-CHANNEL MODE
If the amplifier has to generate more power to operate two subwoofers, connect and set
it as shown in Fig. 5. The use of the low-pass filter used is described in Chapter 5.
(1) To the car radio, left output
(2) To the car radio, right output
(3) Subwoofer
(4) Subwoofer
FIG. 6
USE AS AN AMPLIFIER FOR 4 SATELLITE LOUDSPEAKERS AND A
SUBWOOFER USING AN ADDITIONAL 2-CHANNEL AMPLIFIER (ULTRA
2000)
(1) To the car radio, front left output
(2) To the car radio, front right output
(3) To the car radio, rear left output
(4) To the car radio, rear right output
(5) Front left loudspeaker
(6) Front right loudspeaker
(7) Rear left loudspeaker
(8) Rear right loudspeaker
(9) Subwoofer
GB
16