Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Thank you very much for acquiring a STAYER product!
The drywall sander is designed for sanding walls and ceiling
that are made of drywall or plaster. The sander provides a
superior finish, and is faster than conventional finishing
methods for both new construction and renovation work. It is
designed to work in conjunction with a vacuum cleaner for
minimum dust and best sanding results. The pivoting sanding
head allows excellent results with minimum time and effort.
This manual is consistent with the date of manufacture of your
machine, you will find information on the technical data of the
machine acquired manual check for updates of our machines
on the website: www.grupostayer.com
To ensure appropriate operation and
performance of your new LP600BE / LP700E and
to safeguard your own safety, it is mandatory
that you carefully read this instruction manual
before using the Electric spray gun.
Take special care in observing all safety
precautions! If you do not observe these
precautions you may suffer severe injuries or
even die!
PACKAGING
Your STAYER LP600BE / LP700E will be delivered
to you in a protective cardboard box so as to
avoid damages during transport.
Cardboard is a basic commodity and thus
reusable and suitable for recycling (recycling of
used paper).
1. CONTENT LIST
4.1.
Placement
4.2.
4.3.
6.1.
6.2
6.3.
6.4.
7.1.
7.2.
7.3.
8.1.
8.2.
9.1.
9.2.
9.3.
ENGLISH
15
2. GENERAL SAFETY
Read all safety
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury.
3. SPECIFIC SAFETY INSTRUCTIONS
• Keep your hands away from rotating sanding head area at
all times.
• Prolonged breathing of airborne dust from drywall sanding
may effect respiratory function:
- Always use a vacuum cleaner with a bag approved for
drywall dust installed.
- Always wear a respirator approved for dust and mist.
• Sanding lead-based paint is extremely toxic and should not
be attempted. Only allow professionals with special
training and equipment perform this task.
• Maintain proper footing and balance at all times. Do not
overreach. Use proper scaffolding.
• Always wear appropriate safety equipment when
operating.
• Important: after completing sanding, switch off the switch
and wait for the coasting sanding head to stop completely
before putting the tool down.
• Never operate the tool in an area with flammable solids,
liquids, or gases. Sparks from the commutate I carbon
brushes could cause a fire or explosion.
• There are certain applications for which this tool was
designed. The manufacturer strongly recommends that
this tool cannot be modified and I or used for any
application other than for which it was designed.
• Use the machine with both hands at all times. Loss of
control can cause personal injury.
• Keep power supply cord clear from the working range of
the machine. Always lead the cable away behind YOU.
• Immediately switch off the machine if unusual vibrations or
if other malfunctions occur. Check the machine in order to
find out the cause.
• The dust that arises when working with this tool can be
harmful to health. Use a dust absorption system and wear
a suitable dust protection mask and remove deposited
dust with a vacuum cleaner.
4. COMMISSIONING INSTRUCTIONS
WARNING: Read this manual and general safety
instructions carefully before using the appliance, tor
your own safety. Your power tool should only be
passed on together with these instructions.
Be sure to work in a clean, stable, and with possibilities of
movement.
4.2. Assembly
Unpacking (Fig. 1)
Carefully remove the tool and all loose items from the shipping
container.
Retain all packing materials until after you have inspected and
satisfactorily operated the machine.
15
warnings and all instructions.
Publicidad
Tabla de contenido
