Publicidad
Idiomas disponibles
Idiomas disponibles
1.
Place one lifting column (4) upside down on a
smooth, non-marring surface. Attach lifting column
to center frame (6) using four M6 x 10 mm bolts (E).
Repeat on opposite side of center frame.
(See Figure 1)
Figure 1
4
E
4
2. Attach foot with leveling glides (3) to lifting column
(4) using four M6 x 40 mm bolts (D). Repeat on
opposite lifting column. (See Figure 2)
Figure 2
4
PAGE 2 OF 21
ASSEMBLY
6
4
6
3
D
3. Insert top support bracket (5) into the outside of
the center frame (6). Install using two M6 x 10 mm
bolts (E). Repeat on opposite side of center frame.
(See Figure 3)
Figure 3
6
5
4. With a second person, place desktop (1) upside
down on a smooth, non-marring surface to prevent
scratching. Pre-drilled threaded holes in the desktop
should be facing up.
5. With a second person, carefully place adjustable
frame on top of desktop (1). Adjust position of frame
so that it aligns with corresponding holes in desktop.
6. Attach adjustable frame to desktop using 11
M6 x 14 mm bolts (F). (See Figure 4)
Figure 4
E
5
6
F
1
1123 IH-11111
Publicidad
