Uline METRO Serie Instrucciones De Montaje página 4

10. Align holes on modesty panel brackets (B) with holes
on outer edge of metal modesty panel (2). Attach
using two M6 x 14 mm bolts (F). Repeat on opposite
side of metal modesty panel. (See Figure 9)
11. Attach two modesty panel connectors (C) on the
top edge of metal modesty panel (2) using two
M6 x 14 mm bolts (F). (See Figure 9)
Figure 9
12. Align holes in the modesty panel brackets (B) and
connectors (C) with pre-threaded holes in the
desktop (1). Attach using six M6 x 14 mm bolts (F).
(See Figure 10)
Figure 10
2
2
1
PAGE 4 OF 21
ASSEMBLY CONTINUED
2
B
F
C
F
2
F
B
C
13. Desk is now fully assembled. Using two people,
carefully flip the desk onto the feet.
14. Place cable clips (I) in desired locations to neatly
organize cables underneath the desktop. Cable
clips can be attached using adhesive or
ST3.5 x 16 mm screws (H). (See Figure 11)
Figure 11
1
F
1
1
I
H
1123 IH-11111