Beta 019660091 Manual De Instrucciones página 12

EN I
INSTRUCTIONS FOR USE ISTRUZIONI PER L'USO
Operating mode selection
Select the operating mode by means of selector (6) as follows:
• Select the mode 'Concrete impact drilling", shifting selector (6) to the symbol (Hammer).
• Select the mode ''Wood and metal boring'' ", shifting selector (6) to the symbol (Drill).
Side handle installation
Before making any adjustments, always check that the electric tool is off and unplugged.
Unscrew handle (7), to widen the collar. Slip the collar onto the seat behind chuck (1), and adjust the position of handle (7)
according to the type of required use. Once the correct position has been reached, lock by screwing the handle.
Depth gauge (8) installation
To make holes at a set depth, unscrew handle (7) and slip the depth rod into its seat. Set the depth and lock by screwing handle (7).
12