Black Diamond RECON X Manual De Instrucciones página 15

Point of impact
Point of disappearance
Primary
Search area
4.8.2 Signal search
Start searching in the primary search area for the initial signal detection as well as for visual/acoustic signals. All
participants, observers included, must switch their devices to SEARCH mode (or to standby mode)! Make sure to
follow the external interference distance recommendations and hold the beacon a minimum of 50 cm (20") from
all electronic, magnetic, and metallic sources of interference. The BLACK DIAMOND RECON X has a circular
receiving range that allows a correct indication of direction and distance from the point of initial signal detection
– a specific method such as turning/rotating is not necessary. All signals of the burials that are within the
maximum receiving range are received simultaneously.
Walk the search strip width in the search
area quickly. The recommended search strip
width for the BLACK DIAMOND RECON X is
50 m. The display shows "no signal".
One rescuer with skis
for signal search
d = search strip width
BLACK DIAMOND RECON X MANUAL
SIGNAL SEARCH
Result Accuracy
One rescuer by foot
for signal search
COARSE SEARCH
FINE SEARCH
More rescuers
for signal search
PINPOINTING
Search Speed
14