Publicidad
Idiomas disponibles
Idiomas disponibles
EN
10.2
VERTICAL STORAGE
1
3
1.
Remove the grass catcher.
2.
Remove the battery and safety key.
3.
Pull through the handle holes to fold away the
handles.
4.
Lock the handles into position.
5.
Stand the machine on end and make sure that
the brackets touch the floor.
10.3
STORE THE MACHINE
• Remove the safety key.
• Remove the battery pack(s).
• Clean the machine before storage.
• Make sure the motor is not hot when you store the
machine.
• Make sure that the machine does not have loose
or damaged parts. If it is necessary, follow these
instructions:
• Replace the damaged parts.
• Tighten the bolts.
• Speak to a person at an approved service center.
• Store the machine in a dry area.
• Make sure that children cannot come near the
machine.
English
2
14
11
TROUBLESHOOTING
Problem
Possible cause Solution
The handle is
The bolts are
not in position.
not engaged
correctly.
The machine
The battery ca-
does not start.
pacity is low.
The start han-
dle is defective.
The battery key
is not put in.
The machine
The lawn is
cuts grass un-
rough.
evenly.
The blade
height is not set
correctly.
The machine
Wet grass clip-
does not mulch
pings attach to
correctly.
the deck.
The mulch plug
is missing.
The machine is
The grass is too
hard to push.
tall, or the blade
height is too
low.
The grass
catcher and the
blade drags in
thick grass.
Adjust the
height of the
handle and
make sure that
the bolts and
nuts are aligned
correctly.
Charge the bat-
tery pack.
Replace the
start handle.
Put in the bat-
tery key.
Examine the
mowing area.
Move the
wheels to a
higher position.
Wait until the
grass dries be-
fore mowing.
Install the mulch
plug.
Increase the
blade height.
Empty the grass
clippings from
the grass catch-
er.
Publicidad
