YABER Pro V9 Manual De Instrucciones página 12

Note:
1. Install 2 pieces of AAA batteries into the remote controller before
using it. Do not combine new batteries with old ones in remote
controller, which can cause operation failure due to insufficient power
supply.
2. When using the remote controller, please make sure that the signal
transmitter of the remote controller aims at infrared signal receiver of
the projector.
3. If you are not using the remote controller for an extended period,
please take out batteries to prevent batteries leakage.
Installation
1. Installation Method
The projector can be hanged on the ceiling with special hanger
frame, and placed on the stable desk to project the image according
to the operating environment and requirements. In addition, the
projector can be installed with following methods:
1. Front projection Ceiling mount
3. Front projection Desk mount
Keep the projector at a height where its lens is axial symmetry to the
screen. If this is not possible, use the keystone correction function
to adjust the projection image.If you want to get a free projection
screen,please contact us via support@yabertech.com.
2. Rear projection Ceiling mount
4. Rear projection Desk mount
EN 8