Kärcher KMR 1250 D Manual página 26

Fault
Appliance cannot be started
Engine is running erratically
Engine is running but machine is
only moving slowly or is not moving
at all
Machine is not sweeping properly Check roller brush and side brushes for wear, replace if necessary.
Dust gathers in the machine
High emptying does not function
Roller brush does not turn.
Operation problems with hydraulic
movement parts
Device moves forward or back-
wards when the accelerator is re-
leased
26
English
Remedy
Sit on the driver seat, the seat contact switch gets activated
Charging or replacing battery
Refuel
Open fuel cock
Fill in motor oil
Inform Kärcher Customer Service.
Clean or replace air filter
Inform Kärcher Customer Service.
Release parking brake
Check setting of freewheel lever
Inform Kärcher Customer Service.
Check function of bulk waste flap
Empty waste container
Check sealing strips for wear, adjust or replace as required
Adjust roller mirror
Check drive belts of the roller brush and side-brushes
Inform Kärcher Customer Service.
Switch off dust suction; set the lever to "dry" sweeping operations
Check suction fan drive belt
Check dust filter, clean or replace
Check sealing strips for wear, adjust or replace as required
Replace fuse
Switch is defective; inform Kärcher Customer Service
Hydraulic unit is defective; inform Kärcher Customer Service
Inform Kärcher Customer Service.
Remove belts or cords from roller brush
Inform Kärcher Customer Service.
Zero position is defective; inform Kärcher Customer Service
Faults