ERSA i-CON 2V MK2 Manual Breve página 28

Function description
5.3 Switching OFF:
Attention Risk of burns!
After switching off, the soldering tip remains hot for a long time!
6. Function description
The soldering station is operated by the rotary encoder with touch function, the i-
OP. The i-OP makes it possible to select the desired function or to change values.
Clockwise turning results in higher values and counter-clockwise turning in lower
values. Slow turning effects change in increments of one. Quick turning changes the
selected values in increments of 10/50/100 (depending on the corresponding para-
meter). The push-button function confirms the set parameter value.
6.1 Language selection
Ersa GmbH
CAUTION
a) Press the On/Off switch on the front of the device.
ü Select the language:
a) Turn off the soldering station.
b) Press and hold the i-OP.
c) Switch on the soldering station.
d) Hold the i-OP until the [Configuration] menu appears, and then release the i-
OP.
3BA00270 | Rev. 1 11