Kohler K-5548-K1-TT Guía De Instalación Y Cuidado página 11

Install the Temperature Sensor (cont.)
Apply a small bead of 100% silicone sealant to the back of the
sensor housing. Do not let any sealant contact the sensor probe.
Press the sensor firmly onto the wall.
Temporarily secure the sensor in place with tape.
Allow the sealant to cure before use.
Loop the cable through the ferrite on the adapter end of the cable,
and snap the ferrite closed. Use the cable tie provided to encircle
and lightly secure the looped cable and ferrite.
Kohler Co. 11 1235393-2-E