VONROC TM501XX Traducción Del Manual Original página 5

1. SAFETY INSTRUCTIONS
Read the enclosed safety warnings, the additional
safety warnings and the instructions. Failure to
follow the safety warnings and the instructions may
result in electric shock, fire and/or serious injury.
Save the safety warnings and the instructions for
future reference.
The following symbols are used in the user manual
or on the product:
Read the user manual.
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-obser-
vance of the instructions in this manual.
Not intended for use by children.
SAFETY WARNINGS
Please read these instructions carefully and
thoroughly before using this product and keep
them for future reference. It is important that you
understand how to use this product correctly, so
please take the time to familiarize yourself with the
requirements as outlined in these instructions.
• If you are in any doubt about using this product,
it is strongly recommended to employ the servi-
ces of a suitably qualified expert.
• Please consult the manual for your TV and en-
sure that the weight and size of the TV is within
the limits specified for this product
• Note that not all of the supplied mounting
accessories provided may be required for the
installation of your specific TV.
• The mounting accessories provided are ex-
clusively intended for installation onto strong
supporting structures such as solid brick, solid
concrete or solid wood columns.
2. PRODUCT INFORMATION
Model no.
Dimensions
Wall clearance
Weight
WWW.VONROC.COM
Max. supported screen weight
Supported screen diagonal
Supported VESA patterns
DESCRIPTION
1. Wall plate
2. TV support arm
3. Unlocking cord
4. Spririt level
5. Hardware kit
3. INSTALLATION
Before installation
Attach Wall Plate to Wall
Choose option A or B depending on your wall
construction.
Option A: Installing in drywall with timber supports
(Figure D)
1. Locate the center of two adjacent timber studs
using a stud finder.
TM501XX
660 x 435mm
2. Mark a minimum of four mounting holes over
34mm
the stud centers using the wall plate as a guide.
Position two holes at either end of the wall plate
1,6kg
60kg
37" to 85"
600 x 400
400 x 400
400 x 300
400 x 200
300 x 300
300 x 200
200 x 200
Ensure that your TV is compatible with this
wall mount before proceeding the
installation.
Ensure that the supporting wall is capable
of sustaining the combined weight of this
wall mount and the TV.
If you are installing this TV wall mount using
this method, you must spread the wall plate
across 2 wall studs. Do not attach the wall
plate to a single wall stud in the center of
the wall plate.
You must use the center of the stud to avoid
cracking or splitting the timber during
installation.
EN
5