Publicidad
Idiomas disponibles
Idiomas disponibles
3
1
2
3
1
2
Mounted in specially designed cabinet
(operated from the front – vertical)
The mounting kit must be ordered separately.
Fit the stainless-steel frame to the wall or
another solid surface. The three holes on the
back of the frame lie on a circle with a diame-
ter of 170 mm. Fasten the frame with three
screws (pos. 3).
Fit the cable gland in the bottom of the cabi-
net. Insert the cable through the gland.
Note: The cable between the OD 401 and the
CU 401 must be min. H05VV-F according to
the CENELEC HAR standard.
Fasten the OD 401 with the four TORX
screws, type M5 x 40 PH-FZB, supplied
(pos. 1).
Assemble the operator display and the stain-
less-steel frame with the four hexagon socket
head screws, type M4 x 6 US-A4, supplied
(pos. 2).
Mounted in specially designed cabinet
(operated from below – tilt angle 12°)
The mounting kit must be ordered separately.
Fit the stainless-steel frame to the wall or
another solid surface. The three holes on the
back of the frame lie on a circle with a diame-
ter of 170 mm. Fasten the frame with three
screws (pos. 3).
Fit the cable gland in the bottom of the cabi-
net. Insert the cable through the gland.
Note: The cable between the OD 401 and the
CU 401 must be min. H05VV-F according to
the CENELEC HAR standard.
Fasten the OD 401 with the four TORX
screws, type M5 x 40 PH-FZB, supplied
(pos. 1).
Assemble the operator display and the stain-
less-steel frame with the four hexagon socket
head screws, type M4 x 6 US-A4, supplied
(pos. 2).
9
Publicidad
