Working With The Machine; Switch On/Off - Festool TSC 55 REB Manual De Instrucciones

Independent extraction

Secure the connection piece [7-2] of the dust
collection bag [7-3] at the extractor connector
with a clockwise rotation[7-1].

To empty remove the connection piece [7-2] of
the dust collection bag from the extractor con-
nector [7-3]with an anti-clockwise rotation[7-1].
Festool mobile dust extractor
A Festool mobile dust extractor with an extractor
hose diameter of 27 mm or 36 mm (36 mm recom-
mended due to the reduced risk of clogging) can be
connected to the extractor connector [7-1].
The adapter on a suction hose Ø 27 is inserted into
the angle adapter [7-4]. The adapter on a suction
hose Ø 36 is inserted over the angle adapter [7-4].
Please observe all mentioned safety infor-
mations and the following rules when work-
ing:
– Only guide the power tool towards the workpiece
when it is switched on.
– Check the installation fixture prior to use and do
not use the machine if the fixture does not func-
tion correctly.
– After dropping check the power tool and the saw
blade for damage. Have the damaged parts re-
paired before use. Damaged machines may lead
to injuries and cause the machine to be unsafe.
– Always secure the workpiece in such a manner
that it cannot move while being processed.
– Always hold the machine with two hands at the
handles [1-1] when performing work. This re-
duces the risk of injury and is a prerequisite for
precise work.
16
7

Working with the machine

– Always push the machine forwards [10-2], never
draw the machine towards yourself.
– Adapt the fast-feed speed to prevent the cutters
on the saw blade from overheating and prevent
plastic materials from melting during cutting.
– Make sure that all rotary knobs [1-2] are tight-
ened before starting work.
– Check that the saw blade is seated securely.
– Static charge may occur when sawing (e.g. MDF).
Slide the switch-on lock [1-5] upwards and press
the on/off switch [1-6] (press = ON / release = OFF).
2
1
7-4
For work that generates dust, wear a dust
mask.

Switch on/off

Pressing the switch-on lock unlocks the
plunging mechanism. The saw unit can then
be moved downwards. This causes the saw
blade to emerge from the protective cover.
7-1
7-2
1
7-3
2