Environment - Festool TSC 55 REB Manual De Instrucciones


Push down the machine slowly to the max. pre-
set cutting depth and cut along the full length of
the splinterguard without stopping.
The edge of the splinterguard now corresponds ex-
actly to the cutting edge.
Use only original Festool accessories and Festool
consumable material intended for this machine.
These components are designed specifically for
this machine. Using accessories and consumable
material from other suppliers will most likely affect
the quality of your results and limit warranty
claims. Machine wear or your own personal work-
load may increase depending on the application.
Protect yourself and your machine, and preserve
your warranty claims by always using original Fes-
tool accessories and Festool consumable material!
The order numbers of the accessories and tools can
be found in the Festool catalogue or on the Internet
under "www.festoolusa.com".
Systainer
Many Festool products are shipped in a unique sys-
tem container, called "Systainer". This provides
protection and storage for the tool and accessories.
The Systainers are stackable and can be inter-
locked together. They also can be interlocked atop
Festool CT dust extractors.
To open the Systainer
Turn the T-loc [11-1] to this position.
To lock the Systainer
Turn the T-loc [11-1] to this position.
To connect two Systainers
Place one Systainer on the top of the other (Fig.
[11A]).
Turn the T-loc [11-1] to one of this posi-
tions (Fig. [11B]).
Do not dispose of the device as domestic waste!
Dispose of machines, accessories and packaging at
The Systainers are connected and locked.
 A new generation Systainer is connectable on
top of a previous generation Systainer by the
four latches of the previous Systainer.

Environment

an environmentally responsible recycling centre.
Observe the respective national regulations.
19