Display On Central Unit - Dräger VarioGard Instrucciones De Uso

VarioGard Converter Module
Extension module for the
VarioGard gas warning
system.
For connecting 4...20 mA
transmitters with a two-wire
or three-wire connection to
the VarioGard system.
With four digital inputs for
connecting pushbuttons,
switches, etc. to
VarioGard system.
For installation in control cabinets; with an installation kit for wall-
mounting.
Optional installation on the system bus.
VarioGard Repeater Module
Extension module for the
VarioGard gas warning
system.
With four separate system
bus outputs for connecting up
to 100 slaves to the Vario-
Gard system.
Connection of an external
power supply to meet addi-
tional power requirements.
Connection of an external system emergency power supply.
For installation in control cabinets or as a wall-mounting in the
housing with a corresponding installation kit.
Parallel operation of repeaters permitted; cascading prohibited.
Dräger VarioGard
VarioGard
the
VarioGard
3.1

Display on central unit

1 2 3
Dräger VarioGard
151 ppm CO
1 Explanatory designation:
Dräger VarioGard = pertaining to the system
Transmitter = pertaining to a transmitter
Menu = Accessing and selecting the function
Password
2 Information or entry:
Measured value
Unit (e. g. ppm)
(e. g. 151)
^^^^ = measuring range exceeded
Password entry
3 Slave address of the information displayed e. g. "5"
4 Info:
A Actual value, actual measured value
M Mean value
Ax Alarm threshold x
A A1 Actual value alarm A1
M A2 Mean value alarm A2
y / n Selection
Operation
4
5
I
ESC
Gas type (e. g. CO)
27