Publicidad
Idiomas disponibles
Idiomas disponibles
metal, and the included corundum-bound cut-
ting disc is perfect for abrasive cutting of steel,
non-ferrous metal, plastic or wood.
We also have a great number of additional
problem solvers in our comprehensive range of
accessories.
Caution!
Always remove the battery before beginning
adjusting or assembling work!
1. Press the lock button 1 (Fig. 4).
2. Turn fastening screw 4 with an Allen key 5
until the lock button engages.
3. Twist out fastening screw 4, remove centring
disc 3 and disc 2.
4. Mount new disc. Check to ensure the disc is
seated correctly in the centring shoulder of
the centring disc.
5. Press lock button 1 and tighten fastening
screw 4.
Adjust protective guard
Caution!
1. Release fastening screw 1 (Fig. 5) and move
protective guard in the required direction.
2. Re-tighten the fastening screw. Check to en-
sure the sanding disc is seated correctly in
the cent-ring shoulder of the centring disc.
Working with the device
Switch on the device by pressing the rotational
speed regulating knob 2 (Fig. 1) and adjust to
the appropriate speed.
For best results in rough-machine grinding, ap-
ply the sanding disc at an angle of 30° to 40° to
the grinding surface and move evenly back and
forth over the work piece.
For cutting work, do not jam the sanding disc in
the cutting level.
6 Maintenance, cleaning and care
Caution!
Remove the battery from device before any
assembly, adjustment, maintenance measure
or repair!
Every tool is contaminated by dust when wor-
king. Cleaning is therefore essential. To ensure
a long service life, however, the machine should
be cleaned with a soft cloth or brush after each
use.
Mild soap or other suitable cleaning agent may
be used in this context. Solvents or cleaning
agents containing alcohol (e.g. petrol, cleaning
alcohols etshould be avoided, since these can
attack plastic casings.
Always keep the apertures required for cooling
the motor free of dust and dirt.
Service note
Please note: The mains power input for the
charger may only be replaced by our Proxxon
Service Department or a qualifi ed specialist!
7 Accessories
For more detailed information on accessories,
please request our device catalogue from the
address specifi ed on the last page in the war-
ranty information.
Please note in general:
Proxxon bits and cutters have been designed
to work with our machines, which makes them
optimal for their use.
We will not assume any liability whatsoever
for the safe and proper function of our devices
when using third-party bits and cutters!
Note!
- 19 -
Publicidad
