Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few minutes to review this manual before you start
installation. If you encounter any installation or performance problems, please don't hesitate to contact us. Our
phone numbers and website are listed on the back cover. Thanks again for choosing Kohler Company.
Before You Begin
WARNING: Risk of personal injury. This cast iron whirlpool is extremely heavy. Obtain sufficient help to
carefully lift or move the product.
CAUTION: Risk of product damage. Do not lift the whirlpool by the piping or pump, or use the piping or
pump for structural support of the whirlpool.
We recommend this whirlpool for alcove installation.
-
Inspect the whirlpool for damage before you begin installation.
-
You must install this whirlpool to an adequately supported, level subfloor.
-
The finished floor thickness when the optional drain shroud is used cannot exceed 1 1/8" (2.9cm). If the thickness
-
of the finished floor does exceed 1 1/8" (2.9cm), shim the whirlpool feet to provide clearance for the drain shroud
installation.
Recommended Tools and Materials
Silicone Sealant
Measuring Tape
Safety Glasses
Pipe Wrench
Kohler Co.
Pencil
Tin
Snips
7/16" Wrench
(for optional
drain shroud)
Level
3
Plus:
Conventional Woodworking tools
and materials
Drop cloth
Metal shims
2x4's
A
1011683-2-