Publicidad
Idiomas disponibles
Idiomas disponibles
• Grasp the frozen compartment by the bottom. Do not pull on the frozen compartment door.
• Store the frozen compartment in a dry and safe place.
To remove the frozen compartment proceed as shown.
Fig.
on page 6
9 Cleaning and maintenance
WARNING! Electrocution hazard
Always disconnect the refrigerator from the energy supply before cleaning and servicing it.
NOTICE! Damage hazard
• Do not use abrasive cleaning agents or hard objects during cleaning.
• Never use hard or sharp tools to remove ice or to free frozen objects.
• Ensure that no water drips into the seals. This can damage the electronics.
NOTICE! Damage hazard
The light source can only be replaced by the manufacturer, a service agent or similarly qualified person to
avoid hazard.
Clean the interior and exterior of the refrigerator regularly with a damp cloth and as soon as it becomes dirty.
Refrigerant circuit
The refrigerant circuit is maintenance-free.
Defrosting the refrigerator
NOTICE! Damgae hazard
Do not use any mechanical tools or any other tools to speed up the defrosting process.
NOTE Over time, frost builds up on the back wall inside the refrigerator. If this layer of frost is about 3 mm
(0.12 in) thick, defrost the refrigerator.
To defrost the refrigerator proceed as shown.
Fig.
on page 7
Positioning the refrigerator door into winter position
CAUTION! Risk of injury
The winter position may not be used while driving.
NOTE Put the refrigerator door into the winter position if you are not going to use the device for a longer
period of time. This prevents mold from forming.
NRX0120TP EN
19
Publicidad
