KTM 63712964088 Manual Del Usuario página 25

–
Position heated grip, right
Holding lug
–
Route the cable in the accelerator position sensor without
tension (as shown) and secure with a cable tie if necessary.
501918-01
–
Position the cover.
–
Mount and tighten screws
Guideline
Cover, throttle grip
Info
Make sure that the cable is not bent or pinched.
501922-01
Assembling
–
Position hand guard with handlebar weight.
–
Tighten screw
Guideline
Screw, hand guard
501931-01
–
Position the hand guard on the handlebar.
–
Mount and tighten fitting
Guideline
Hand guard fitting
501932-01
Cable routing
–
Route the cables for the heated grips on both sides along
the existing cables down to the steering head.
501923-01
1
(included) on the handlebar.
A B
engages in recess .
9
.
M5 5 Nm (3.7 lbf ft)
5
.
M8 25 Nm
(18.4 lbf ft)
6
.
M6 6 Nm (4.4 lbf ft)
ASSEMBLY 5
9