Ninja GR101EU Manual De Instrucciones página 8

GETTING TO KNOW THE NINJA
SIZZLE GRILL AND PLANCHA
Removable mesh Lid
(Dishwasher safe)
Power Indicator
Light
Plancha
To order replacement or additional parts and accessories, visit ninjakitchen.eu
BEFORE FIRST USE
1 Remove and discard any packaging material, stickers and tape from the unit.
2 Remove all accessories from the package and carefully read the manual before use. Please pay
particular attention to operational instructions, warnings and important safeguards to avoid any
injury or property damage.
3
Wash the grill and plancha with hot soapy water and dry thoroughly. NEVER submerge the main
unit in water.
4 We recommend turning the unit on and running it on 260°C for 10 minutes without adding food.
Make sure the area is well ventilated. This removes any packaging residue and odour traces that
may be present. This is completely safe and not detrimental to the performance of the grill.
HOW TO HAVE A LOW SMOKE EXPERIENCE
Always use the recommended grill settings. Our chef-designed temperature settings maximise grill
flavours and textures while minimising smoke.
160°C 190°C
Frozen meats
Marinated proteins or
protiens with sauce
When using thicker
Bacon
barbecue sauces
Steaks
Chicken
Salmon
Applying oil to food or the grill or plancha can improve nonstick performance during cooking.
For best results, Sunflower, Refined Coconut, Avocado, Vegetable, or Rapeseed oils are
recommended.Olive Oil, Butter, Margarine, or aerosol cooking sprays are NOT recommended.
15 ninjakitchen.eu
Grill Plate
(Removable)
Grease Trap
Temperature Dial
Please note, both the grill and flat
plate should be hand-washed only.
200°C 260°C
Hotdogs
Veggies
Pancakes
Fruit
Fried eggs
Fresh/Frozen
seafood
Cheese toastie
COOKING WITH THE NINJA SIZZLE GRILL AND PLANCHA
1
To install the grill or plancha, position it over
the base with the grease trap toward
the front. Place the plate down ensuring the
sides align with the exterior of the base.
2
Make sure the unit is plugged in, then turn the
dial to the desired temperature. The power
indicator light will illuminate.
3 Allow the grill to preheat with the lid closed for
7 minutes before cooking.
4 When preheat is complete, open the lid and
place ingredients on the grill plate.
NOTE: Ninja Sizzle Grill and Plancha can be
used with the lid open or closed.
INSTALLING AND REMOVING THE SPLATTER LID
1 After allowing the unit to cool, remove the lid by opening it until it is approximately vertical
(Figure 1). Then lift the lid straight up out of the hinge base.
2
To install the lid, hold it vertically with the handle facing up and the hinge pivots over the hinge
base (Figure 2). Ensure that the flat sections of the hinge pivots are oriented vertically (Figure 3).
Lower the lid hinge pivots into the hinge base, then close the lid.
Figure 1 Figure 2
5
Once ingredients are cooked to satisfaction,
remove from the grill and turn the dial until
it clicks into the "OFF" position. The power
indicator light will turn off.
6
To remove the grill or plancha for cleaning,
ensure the dial is in the "OFF" position, and the
unit is unplugged and has had sufficient time
to cool. Open the lid and lift the cooking plate
straight up by grabbing the vertical walls along
the edge of the cooking surface.
Figure 3
ninjakitchen.eu 16