Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Steps
Insert (4) fasteners through the rubber gasket, hood shield, and into the sleeve. Securely tighten.
9
Apply firm pressure to OUTBOARD tabs to ensure adhesion of tape
to hood surface.
10
Close Hood.
12
Care and Cleaning
• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International. We take the utmost pride in our
products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in
terms of fit, durability, finish and ease of installation.
Auto Ventshade™, the Auto Ventshade™ logo and the AVS™ logo are trademarks of Lund, Inc.
™
NOTE: Actual application may vary slightly from illustrations.
Lund International
800-241-7219 • Visit us at lundinternational.com
© 2021 Lund, Inc. All rights reserved.
4X
DO NOT OVER TIGHTEN
Turn both of the hood bumpers counter clock-
11
13
Page 3 of 3
wise 1 1/2 turns.
Apply (2) bump ons to surface of hood.
The material that your product is made from can
be recycled. Please also consider recycling the
packaging that your product came in.
hood
sleeve
hood shield
rubber seal
fastener
Publicidad
