Publicidad
Idiomas disponibles
Idiomas disponibles
Description of the electronic clock/timer
2
KEYS
1
,
and
: Permits the programming of
the functions of the electronic clock/timer
SYMBOLS
2
Clock Functions
BUZZER: Lights up on selecting the buzzer
function of the clock. Generates an acous-
tic signal when the time is up. The oven
does not turn off at the end of the timer pe-
riod. This function can also be used while
the oven is in use.
and
PROGRAMMING: Lights up to in-
dicate that the oven is programmed (cook-
ing time, stop time or total).
•
Cooking Time: This function allows you
to programme the cooking time, after which
the oven will turn off automatically.
•
Cooking Stop Time: This function al-
lows you to programme the cooking stop
time, after which the oven will turn off auto-
matically.
•
and
Cooking Time and Cooking
Stop Time: This setting allows you to pro-
gramme the cooking time and cooking stop
time. The oven switches on automatically at
the set time and operates for the selected
cooking time (Cooking Time). It then switches
off automatically at the indicated time (Cook-
ing Stop Time).
1
2
CLOCK/TIMER LOCK: Indicates that the
touch keys for the clock/timer are locked,
preventing modifications by small children.
Other functions
HEATING: Indicates that the oven is trans-
mitting heat to the food.
HYDROCLEAN: Lights up while the Teka
Hydroclean
function is in progress.
®
PYROLYSIS: Only for pyrolytic models.
Lights up while the Pyrolytic function is in
progress.
DOOR LOCK: Only for pyrolytic mod-
els. Indicates that the door is locked, either
manually or automatically while the pyrolytic
function is in progress.
WARNING
The sensitivity of the touch keys adapts
continually
to
tions. Make sure the surface of the front
control panel is clean and free of ob-
stacles
when
plugging
If the clock does not respond correctly
when you touch the keys, unplug the oven
for a few seconds and then plug it in again.
In this way, sensors adjust automatically so
that they will react once more to fingertip
control.
SETTING THE TIME
• To set the oven time, the controls on the
function and temperature control dials
must be turned to position
• On plugging in the oven, the time 12:00
flashes on the clock.
• Press
or
then the minutes. Two beeps, one after the
other, confirm the selected time.
• To change the time, press
the time starts flashing. Press
low the instructions in the previous point.
environmental
condi-
in
the
oven.
.
to adjust the hours and
or
and fol-
User Guide
English
until
35
Publicidad
