Etac Molift RgoSling Shadow Manual Del Usuario página 10

General
Thank you for choosing an Etac device.
This manual must be read thoroughly before you start using the device as it contains important safety
information and gives instructions on how to use the device correctly. Visit www.etac.com for all relevant
product documentation, for example the user manual, periodic inspection document and recycling in-
structions. You can select your language via the "International" and "Local websites" link.
You can also consult the QR code on the product label for further information and instructions.
Copyright
This document is the property of Etac A/S. The con-
tent shall not be modified in whole or part without
prior approval of Etac A/S.
Disclaimer
Etac continuously makes improvements to our de-
vices and information. We therefore reserve the
right to modify our devices and instructions for use
without prior notice. Consult www.etac.com to find
the latest version of the documentation.
Declaration of Conformity
The device mentioned in this manual and the dif-
ferent models hereof comply with the Medical De-
vice Regulation (EU) 2017/745.
The device is classified as a Class I medical device.
Device description
Etac supplies a wide selection of slings for different types of transfers. The Molift RgoSling series is de-
signed to provide high comfort for users by evenly distributing weight and pressure. Molift RgoSlings are
available in different sizes, models and materials. See www.etac.com for a complete overview of possible
variants.
Molift RgoSling Shadow has a high back, head support and supports the entire core. This makes it suita-
ble for users that require full body support and especially suitable for users in moulded seat units.
The sling is designed to remain under the user after the transfer and has no straps or seams on the
surface.
The sling can be used for hoisting to and from a sitting and/or a lying position. The sling is designed to be
combined with a 4-point sling bar, but it also works with a 2-point sling bar.
The sling has a standard split-leg support opening.
Benefits
The sling is made of net material which shapes it-
self to the body and allows moisture and heat to
pass through.
The sliding loops in the upper straps allow an even
weight distribution during the transfer.
ENGLISH
Product standards
The device has been tested and complies with the
requirements applicable for this type of device in
the below mentioned standards:
• ISO 10535:2021 Assistive products – Hoists for
the transfer of persons – Requirements and test
methods.
Notice
Any serious incident that has occurred in relation
to the device should be reported to your distri-
butor/representative and the national competent
authority within your region in a timely manner. The
distributor/representative will forward the informa-
tion to the manufacturer.
Pre-sales information
Please visit www.etac.com.
Materials
Fabric: Polyester mesh
10
etac.com