IXROAD MD300 Manual Del Usuario página 4

Date Stamp: When it is turned on, the date and time will be displayed at the bottom of the recorded
video. After turning it off, the recorded video will not display the date and time.
Gravity Sensing: Once the vibration amplitude exceeds the set value, G-sensor will be triggered. The
current video will be locked and will not be overwritten by the loop recording function, providing you with
important video evidence.
Parking Monitor: After the motorcycle is turned off, if an external collision is detected, the motorcycle
dash cam will automatically turn on and record 10 seconds of video. The recorded video will not be
overwritten by the loop recording function. It should be noted that if the parking monitor is triggered
frequently, the battery of the motorcycle may be exhausted, please turn on this function with caution.
WiFi: After switching it on, your smartphone and the control unit will be able to connect within the local
area network.
Date/Time: Set the date and time in your region by pressing the "Up" or "Down" button, and short press
the "Menu" button to exit the setting.
Auto Power Off: When you stop recording, if you do not give any command to the control unit within the
set time, the motorcycle dash cam will automatically shut down after the set time.
Beep Sound: Turn button sounds on or off.
Time Zone: Please set the time zone of your area accurately, so that the GPS module can record the
riding route correctly. If the time zone setting is wrong, the riding route shown on the map will also be
wrong.
GPS Speed: When it is turned on, it will be able to calculate your riding speed from satellite signals.
Speed Unit Conversion: Switch the unit of GPS speed between km/h and mph.
Language: Select the language of your region.
Frequency: Please set it to the frequency of the AC power in your area.
Screen Saver: The screen of the control unit will go off after the set time without interrupting the
recording.
Screen Mirroring: When it is turned on, the image from the rear camera will be mirrored flipped on the
screen. The displayed object position will match the actual position.
Format: This command will format your Micro SD card, please backup important data before formatting.
Default Setting: Reset all settings to factory settings.
Version: Displays the current firmware version number.
Playback
Long press the "Menu" button to enter playback mode, and short press the "Menu" button to enter the
video and photo playlist. Short press the "Up" or "Down" button to cycle through the list, short press the
"OK" button to play a video or photo. Long press the "Menu" button to exit playback mode.
There are also "Delete" and "Protect" options in the playlist. The "Delete" option can be used to delete
videos or photos. The "Protect" option is used to lock the video to prevent important video from being
overwritten by the loop recording feature.
Switch View
Short press the "Up" button to switch the image layout of the front and rear cameras on the screen.
WiFi Shortcut Button
Long press the "Down" button to quickly turn WiFi on or off.
4, Wired Control
"Photo" Button: While recording a video, press it to snap a photo.
"Lock / Unlock" Button: While recording a video, press it to lock or unlock the current video.
"Audio" Button: While recording video, press it to turn audio on or off.
There is an indicator light on the wired control, which indicates the working status of the dash cam.
Blinking slowly: Indicates that the motorcycle dash cam is recording video.
2