Taurus AIRBRUME 2500 Instrucciones De Uso página 14

• NOTE: It is not mandatory to remove the water tank. Even
so, if it's done, make sure that it is placed correctly after
filling it.
BEFORE USE
• Make sure that all product's packaging has been
removed.
• Please read carefully the "Safety advice and warnings"
booklet before first use.
• Prepare the appliance according to the function you wish
to use.
• Ensure that the appliance is level with respect to the floor.
• Do not cover or obstruct any of the openings of the
appliance.
• The plug must be easily accessible so it can be
disconnected in an emergency.
USE
• Extend the supply cord completely before plugging it in.
• Connect the appliance to the mains.
• Guide the appliance to direct the flow of air in the desired
direction.
• Turn the appliance on, by using the on/off button.
• The fan speed indicator comes on indicating low speed
selected. (3).
• Select the desired speed or one of the predefined modes.
FAN FUNCTION
• Select the fan position.
• Select the desired speed by pressing (e) speed button on
the remote control or (6) on the control panel.
MIST FAN FUNCTION
• The appliance has a button that allows getting the control
of the mist intensity generated.
• Select the desired mist intensity by pressing the mist
button on the remote control (a) or on the control panel
(5).
• The water tank lasts between 5 h and 8 h hours
depending the mist intensity selected.
• When the water tank is empty, the appliance stops
generating mist and the empty water tank indicator lights
up.
F
AN MODES
• The wind mode can be adjusted by pressing the "MODE"
button. (b).
• Normal (1.1): The fan will operate in High, Medium or Low
mode as set by user.
• Breeze (1.3): The fan will operate at low, medium and
high speeds in different patterns to provide a wind flow
that replicated natural airflow.
• Night (1.2): Sleep mode can operate at low, medium and
high speeds. In sleep mode, the wind speed will decrease
in set patterns before operating at a low speed until shut
down.
TIMER FUNCTION
• The appliance's operating time can be controlled. You
can select the length of time the fan will be in operation
from spans ranging from 0,5 to 7,5 hours in 0,5 hour
increments.
• To program the operating time simply press the TIMER
button (8-c) repeatedly, until the desired time is reached.
OSCILLATION FUNCTION
• The oscillation function makes it possible to direct the flow
from the apparatus so that it automatically alternates over
a range of 75 º.
• To activate this function, turn the button (f) in the remote
control or (7) in the control panel.
• To deactivate this function, press one of these buttons
again.
ONCE YOU HAVE FINISHED USING THE APPLIANCE
• Turn the appliance off, using the on/off button.
• Unplug the appliance from the mains.
• Remove the water from the water tank.
• Clean the water tank.
• It is necessary to change the water and clean the water
tank and the base, every 72 h.
• Put the supply cord back in the supply cord housing.
EMPTY/CLEAN WATER TANK
• Remove the water tank and empty it.
• There will be traces of water at the base, to empty it, pull
out the drain plug. (Fig. 6.1).
• Wash the water tank and the base as explained in the
«Cleaning» section.
SUPPLY CORD HOUSING
• This appliance has a supply cord housing situated on its
posterior.