CLEANING
• Disconnect the appliance from the mains and allow it to
cool before undertaking any cleaning task.
• Clean the electrical equipment and the mains connection
with a damp cloth and dry. DO NOT IMMERSE IN
WATER OR ANY OTHER LIQUID.
• Clean the equipment with a damp cloth with a few drops
of washing-up liquid and then dry.
• Do not use solvents, or products with an acid or base pH
such as bleach, or abrasive products, for cleaning the
appliance.
• Never immerse the appliance in water or any other liquid
or place it under running water.
• Never immerse the connector in water or any other liquid
or place it under running water.
• If the appliance is not in good condition of cleanliness, its
surface may degrade and inexorably affect the duration
of the appliance's useful life and could become unsafe
to use.
• The following pieces may be washed using soapy hot
water:
- Water Tank
• Then dry all parts before its assembly and storage.
HOW TO DEAL WITH LIME SCALE INCRUSTATIONS
• For the appliance to work correctly it should be kept free
of limescale or magnesium incrustations caused by the
use of hard water.
• To prevent this kind of problem, we recommend the use of
water with low lime or magnesium mineralisation.
• However, if it is not possible to use the kind of water
recommended above, you should periodically remove the
limescale from the appliance:
- Every 6 weeks if the water is "very hard".
- Every 12 weeks if the water is "hard".
• A specific anti-lime scale product should be used on this
kind of product.
• Fill the tank with water plus the anti-lime product, leave
about 30 minutes, drain and clean with water.
• Homemade solutions are not recommended in the
decaling of this appliance, such as the use of vinegar.