Rottner KEYO Guia De Inicio Rapido página 5

3.1 Push the "0" on the key path two times.
3.2 Press the red button on the inside of the door. You will hear 3 sound signals.
3.3 By using the keypad, type in the new Usercode. Because of security reasons, we advice you to
enter a code with 3 to 8 digits.
3.4 Confirm the code by pushing the button „#" on the key path on the outside of the door.
3.5 A correct programming of the code is confirmed by 2 sound signals.
3.6 You have now successfully programmed the Mastercode.
4.1 By using the key path, type in the code you have programmed. Confirm the entry of your code
by pushing the „#" button.
4.2 You will hear 2 sound signals and the green LED will flash. You now have 5 seconds to open the
door by using the door handle.
4.3 Turn the door handle to the right in order to open the door.
When entering a wrong code, a sound signal will sound 3 times. In total you can enter 3 times a
wrong code, before the electronic lock will start its locking time. After 3 wrong codes the electron-
ics of the lock will shut down for 4 minutes, and you will not be able to operate the lock.
After 4 minutes you can start trying entering the correct code.
In case you have lost / forgotten your code, or when the batteries are empty, you can do the fol-
lowing:
6.1 Remove the cover at the front below the door handle.
6.2 Insert the emergency-key that comes with the key cabinet, and turn it clockwise.
6.3 Now you can open the key cabinet, by turning the door handle clockwise.
7.1 Open the battery drawer on the inside of the door of the key cabinet.
7.2 Insert four 1,5 V AA batteries (Alkaline). Pay attention to the polarity !! Close the battery drawer.
ATTENTION: We strongly advice you to use a high-quality Alkaline battery, to ensure the proper
functioning of the electronic lock.
Your new Safe and it's content aren't automatically insured.
Please write a letter to your insurance about the insurance value you'd like.
3. PROGRAMMING OF THE NEW MASTERCODE
4. OPENING
5. LOCKING TIME WHEN ENTERING FALSE CODES
6. EMERGENCY KEY OPENING
7. CHANGING OF THE BATTERIES
ATTENTION
KEYO 5