Using The Trimmer - EASYHOME 16113906 Manual Del Usuario

USA
Handling
2. Take the protective cap
(see fig. A).
3. Use the On/Off switch
4. While applying gentle pressure, move the shaver
head perpendicular to the direction of hair
2
growth.
5. After a few strokes, use your free hand to check the
results and repeat step 4 if necessary.
6. Shave as described in steps 3–4.
7. If necessary, use the trimmer as described in the
chapter "Using the trimmer" (see fig. C).
8. Switch the shaver off once you have finished shaving.
9. Clean the shaver as described in the chapter "Daily
cleaning after a wet shave".

Using the trimmer

Keep in mind that the trimmer always
generates a straight cutting edge. If you do
not want a straight cutting edge, you must
hold the shaver at an angle.
For hard-to-reach areas or for very precise
cuts, use a comb to check the hair you intend
to trim with the trimmer and the cut length.
Use the trimmer as follows:
1. Move the trimmer
locks into place (see fig. C).
2. Use the On/Off switch
20
TM3service@outlook.com
1 off of the shaver
5 to turn the shaver on.
13 all the way out until it audibly
5 to turn the shaver on.
877-386-8264
USA