Daily Cleaning After A Wet Shave - EASYHOME 16113906 Manual Del Usuario

3. Hold the shaver over the sink.
4. Depress both release buttons
shaver head
5. Pull the shaver head up and off.
6. Knock the shaver head out gently over a sink to
remove stubbles.
7. Without the shaver head mounted, use the On/Off
switch to switch the shaver on for approx.
5–10 seconds to dispel any stubble from the shaver
3
blades
8. Firmly mount the shaver head on the shaver until the
locking mechanism audibly engages (see fig. E).
9. Place the protective cap
The shaver is now ready for use again.

Daily cleaning after a wet shave

1. Use the On/Off switch
2. Before cleaning, pull the 5 V plug
shaver.
3. Hold the shaver over the sink.
4. Depress both release buttons
shaver head
5. Pull the shaver head up and off.
6. Wash the shaver head thoroughly under warm
running water on the inside and outside (see fig. F).
AFTER SALES SUPPORT
2
(see fig. D).
.
5
2
(see fig. D).
877-386-8264
USA
Cleaning and maintenance
4
to release the
1
on the shaver.
to turn off the shaver.
8
4
to release the
USA
out of the
23