Suzuki 95400-4882 Serie Instrucciones Para El Montaje página 3

Installation
This instruction indicates an
assembling process for a right
side case.
An assembling process for a left
side
instruction.
1. Open a lid (A) of right side case
sold separately.
(Refer to the installation instruc-
tions of the side case set.)
2. Put the Washer 4 and the Seal Washer 5 on the Screw 3 as
shown.
3. Put the Side Case Cover (Right Side) 1 on the lid (A), and tighten
the Screw 3 at the specific tightening torque.
 Screw 3 : 2.0 N·m (0.20 kgf-m, 1.50 lbf-ft)
Follow the assembling order of them. There is possibility to down
water resist performance in case of their assembling order incor-
rectly.
4. Close the lid (A) after the Side Case Cover (Right Side) 1 is attached
on it.
(Refer to the installation instructions of the side case set.)
This product is exclusively designed for the side case set.
Care
and
(For North America market No. 95400-4887 / For the other markets
Maintenance
95400-4885)
Don't use it for any other purpose and products.
NOTE
case also follows the
(A)
NOTICE
GENUINE SUZUKI ACCESSORIES
3/3