Publicidad
Idiomas disponibles
Idiomas disponibles
Using Your Blender
IMPORTANT: Your Glass Jar and Cutting Blade Assembly are subject to wear during normal use. Always inspect Jar for nicks, chips, or cracks.
Always inspect Cutting Blade Assembly for broken, cracked, or loose blades. Avoid contact with blades or moving parts. If Jar or Cutting Blade
Assembly is damaged, do not use. Visit hamiltonbeach.com/parts to obtain replacement parts.
1. Rotate the Collar clockwise
until tight.
2. Place Jar on Base.
5. To pulse, press and hold
ICE CRUSH button. Blender
will run only when button is
held down.
3. Add ingredients to Jar. Place
Lid on Jar. Plug into outlet.
4. Press the
ON/OFF button.
The ready light will flash.
Select desired cycle to start
Blender. The Blender will not
operate unless the
ON/OFF
button is pressed first.
6. The
AUTO SMOOTHIE
setting pulses to crush ice,
switches to low to mix,
and then ramps to high
for smoothness. After the
45-second cycle, the Blender
will stop automatically.
5
Publicidad
