Care and Cleaning
1. Plug into outlet. Add 3 cups (710 mL) warm water and one or two
drops of liquid dish detergent to Glass Jar. Place Lid on Jar. Press
the
ON/OFF button. The ready light will flash. Press
button to clean the Jar, and then press
Unplug. Pour out soapy water. Rinse and dry.
2. Remove Glass Jar from Base. Rotate the Collar counterclockwise
until the Collar and Cutting Blade Assembly come apart from the
Jar.
Blender Tips
• To add foods when Blender is operating, open Hinged Cap and add
ingredients through the opening.
• For best performance, the minimum amount of liquid needed per
recipe is 1 cup (8 ounces/237 mL). Add more liquid if food is not
blending properly.
• If blending action stops during blending or ingredients stick to
sides of the Jar, there may not be enough liquid in the Jar to blend
efficiently.
8
w WARNING
Disconnect power before cleaning. Do not immerse cord, plug,
base, or motor in water or other liquid.
3. Wipe Blender Base, Control Panel, and cord with a damp cloth
CLEAN
STOP button to turn off.
4. The Glass Jar, Personal Cup, Lid, Cutting Blade Assembly, and
5. DO NOT use the "SANITIZE" setting when washing in the
• DO NOT use Blender to mash potatoes, mix stiff dough, whip egg
whites, grind raw meat, or extract juices from fruits and vegetables.
• DO NOT store food or liquids in the Jar.
• Avoid bumping or dropping the Blender when in operation
or at any time.
NOTE: This machine is equipped with motor overload protection.
If the motor stops during operation due to overheating, unplug
and allow it to cool down for approximately 15 minutes. Plug
machine back in to resume normal operation.
Electrical Shock Hazard.
or sponge. To remove stubborn spots, use a mild, nonabrasive
cleanser.
Collar are dishwasher-safe.
dishwasher. "SANITIZE" cycle temperatures could damage your
product. Parts may also be washed with hot, soapy water. Care
should be taken when handling the Cutting Blade Assembly, since
the blades are very sharp. Rinse and dry thoroughly. Do not soak.