Descargar Imprimir esta página

Ryobi RYBRC Manual Del Operador página 4

Accesorio para desbrozadora

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING:
Read and understand all instructions. Failure to follow
all instructions listed below, may result in electric shock,
fire, and/or serious personal injury.
SAVE THESE INSTRUCTIONS
„ Read these instructions and the instructions for the power
head thoroughly before using the attachment.
„ Know the tool. Read and understand the operator's
manual and observe the warnings and instruction labels
affixed to the tool.
„ Do not allow children or untrained individuals to use this
unit.
„ Always wear eye protection with side shields marked to
comply with ANSI Z87.1 and hearing protection when
operating this unit.
„ Wear heavy long pants, a long-sleeved shirt, boots, and
gloves. Do not wear loose fitting clothing, short pants,
jewelry of any kind, or go barefoot.
„ Secure long hair so it is above shoulder level to prevent
entanglement in any moving parts.
„ Keep all bystanders, children, and pets at least 50 ft.
away. Bystanders should be encouraged to wear eye
protection.
„ Stay alert, watch what you are doing, and use common
sense when operating a power tool. Do not use tool
while tired or under the influence of drugs, alcohol, or
medication. A moment of inattention while operating
power tools may result in serious personal injury.
„ Do not operate in poor lighting.
„ Do not overreach. Keep proper footing and balance at all
times. Proper footing and balance enables better control
of the tool in unexpected situations.
„ Do not use the machine in bad weather conditions, es-
pecially when there is a risk of lightning. This decreases
the risk of being struck by lightning.
„ Thoroughly inspect the area for wildlife where the machine
is to be used. Wildlife may be injured by the machine
during operation.
„ Thoroughly inspect the area where the machine is to be
used and remove all stones, sticks, wires, bones, and
other foreign objects. Thrown objects can cause personal
injury.
GENERAL SAFETY RULES
BRUSH CUTTER SAFETY RULES
„ Keep all parts of your body away from any moving part.
„ Do not touch areas around the muffler or cylinder of the
power head. These parts get hot from operation. Failure
to heed this warning could result in possible serious
personal injury.
„ Always stop the engine or motor and remove the spark
plug wire or disconnect from the power supply before
making any adjustments or repairs except for carburetor
adjustments.
„ Inspect unit before each use for loose fasteners and
damaged or missing parts. Correct before using the
attachment. Failure to do so can cause serious injury.
„ Use only manufacturer's recommended or equivalent
replacement parts. Failure to do so may cause poor
performance, possible injury, and will void your warranty.
„ Do not, under any circumstance, use any attachment or
accessory on this product, which was not provided with
the product, or identified as appropriate for use with this
product in the operator's manual.
„ Avoid dangerous environments. Do not use the attach-
ment in damp or wet locations. Do not use in rain.
„ Use the right attachment. Do not use attachment for any
job except that for which it is intended.
„ Ensure handle is mounted in accordance with the as-
sembly instructions in this manual.
WHEN USING A BATTERY OPERATED
POWER HEAD:
„ Use only with Ryobi P102, P107, P108, P189, P190,
P191, P192, P197, PBP002, PBP003, PBP004, PBP005
or PBP006 18V batteries, OR OP40201, OP40204,
OP40261, OP40301, OP40401, OP40404, OP40501,
OP40601, OP40602, OP40603, OP40604, OP40605,
OP40752, OP40753 or OP40804 40V batteries as ap-
plicable with your Ryobi power head.
„ Before using the machine, always visually inspect to see
that the cutter or blade and the cutter or blade assembly
are not damaged. Damaged parts increase the risk of
injury.
„ Follow instructions for changing accessories. Improperly
tightened blade securing nuts or bolts may either damage
the blade or result in it becoming detached.
„ The rated rotational speed of the blade must be at least
equal to the maximum rotational speed marked on the
machine. Blades running faster than their rated rotational
speed can break and fly apart.
2 — English

Publicidad

loading