cecotec CONGA 7000 MATTRESS Manual De Instrucciones página 18

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. Mode button
2. Power button
3. Dirt tank
Mode indicator lights
4.
5. Power cable
Fig. 2
Rotary brush
1.
2. Hot-air outlet
3. UV light
4. Power cable
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
appliance.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the appliance
when transporting it in the future. In case the original packaging is disposed of, make sure
all packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content
- Conga 7000 Mattress vacuum cleaner
Cleaning brush
-
- Instruction manual
34
CONGA 7000 MATTRESS
3. OPERATION
Fig. 3.
1. Mode button
2. Power button
Dust-mite removal indicator light
3.
4. Brush-rotation indicator light
5. Suction indicator light
Complete cleaning mode: suction, brush rotation, and dust-mite removal
Upon switch-on, the appliance will work in suction, brush rotation, and Dust-mite Removal
mode by default. The corresponding light indicator will light up.
Press the Power button to turn off the appliance.
Suction and Brush-rotation mode
- Once the appliance is switched on and in complete cleaning mode, press the Mode button
to switch to Suction and Brush Rotation mode. The corresponding light indicator will light
up.
- Press the Power button to turn off the appliance.
Suction and Dust-mite Removal mode
Once the appliance is switched on and in Suction and Brush Rotation mode, press the Mode
-
button to switch to Suction and Dust-mite removal mode. The corresponding indicator
light will come on.
- Press the Mode button once to return to Complete Cleaning mode.
Press the Power button to turn off the appliance.
-
Please note
The 3 operating modes will cycle through. Press the Mode button once to switch from one
mode to another in the above order.
Warning
- To avoid accidental damage, place the UV-C lamp 5 cm away from the object to be irradiated
and tilt it to a degree no greater than 30°. If this range is exceeded, the UV-C lamp will
automatically switch off. Under this premise, the Dust-mite Removal mode indicator light
will come on, indicating that the lamp is working properly.
- Once the appliance starts working in Dust-mite Removal mode, the hot-air outlet will blow
hot air. Do not touch the hot-air outlet with your hands while the appliance is in operation.
ENGLISH
35
CONGA 7000 MATTRESS