Power supply unit
Output: 5V, 1A (EU)
Plug: outside 5.5 mm, inside 2.1
mm
Polarity: + in the middle / - outside
(-)-(o-(+)
Notes on cleaning
1. Avoid disassembling the microscope!
Because of being a precise optical instrument, do not
disassemble the microscope. That may cause serious
damage to its performance. Do not disassemble the
objectives.
2. Avoid contamination!
You should avoid dust or moisture coming into contact
with your microscope. Avoid putting fingerprints on any
optical surfaces! If dust or dirt nevertheless have gotten
onto your microscope, or the accessories, remove it as
described below.
3. Cleaning non-optical parts:
Disconnect the plug from mains socket before cleaning
non-optical parts of the microscope (e. g. the frame or
the stage). Firstly, remove dust or dirt from your micro-
scope, or accessories, using a soft brush. Then clean the
soiled area with a soft, lint-free cloth; the cloth may be
moistened with a mild detergent solution. Be sure that
the microscope is dry before using. For cleaning the
painted parts or plastic components, do NOT use organic
solvents such as alcohol, ether, acetone, xylene or other
thinner etc.! Dirt or fingerprints should only be cleaned
with a slightly damp, lint-free cloth. Please do not use
any additional cleaning agents!
4. Cleaning optical parts:
In order to enhance the optical quality, the lenses of
eyepieces or objectives are coated. They should not be
wiped dry, as dry dirt or dust can scratch the sensitive
coating. To clean the objectives, you should unscrew
them from the turret. Always blow the loose dust off the
lens surfaces first. Use good quality lens cloths or soft
cloth slightly moistened with pure alcohol (available from
pharmacies) and wipe the lens surface clean.
5. When not in use:
After usage, cover the microscope with the dust cover
(made of plastic) and place it where it is dry and mould-
less. In the case of non-use for a longer time, you should
stow the microscope and the accessories in their correct
containers again. We suggest the storage of all objec-
tives and eye pieces in a closed container with drying
agent.
Remember: A well maintained microscope will keep its
optical quality for years and thus maintain its value.
Disposal
Dispose of the packaging materials properly, accord-
ing to their type (paper, cardboard, etc). Contact
your local waste disposal service or environmental
authority for infor mation on the proper disposal.
Do not dispose of electronic devices in the household
garbage! As per the Directive 2012/19/EU of the
European Parliament on waste electrical and elec-
tronic equipment and its adaptation into national law, used
electronic devices must be collected separately and recycled
in an environmentally friendly manner.
Please take the current legal regulations into account when
disposing of your device. You can get more information on
the proper disposal from your local waste disposal service
or environmental authority.
Warranty & Service
The regular warranty period is 2 years and begins on the
day of purchase. To benefit from an extended voluntary
warranty period as stated on the gift box, registration on
our website is required.
You can consult the full warranty terms as well as informa-
tion on extending the warranty period and details of our
services at www.bresser.de/warranty_terms.
CE Declaration of conformity
Bresser GmbH has issued a "CE Declaration of
Conformity" in accordance with applicable guidelines
and corresponding standards. The full text of the EU declara-
tion of conformity is available at the following internet
address:
www.bresser.de/download/5201020/CE/5201020_CE.pdf
UKCA Declaration of conformity
Bresser GmbH has issued a "UKCA Declaration of
Conformity" in accordance with applicable guidelines
and corresponding standards. The full text of the EU
declaration of conformity is available at the following internet
address:
www.bresser.de/download/5201020/UKCA/5201020_UKCA.
pdf
Bresser UK Ltd.
Suite 3G, Eden House · Enterprise Way
Edenbridge, Kent TN8 6HF · Great Britain
- 13 -
DE
DE
EN
GB
FR
FR
ES
NL