Lindy 38208 Manual De Usuario página 4

User Manual
Product Diagram
Transmitter
HDMI In: Connect an HDMI source device.

EDID Dipswitch: This switch can be used to select an EDID to copy. If switched to Tx, the extender will

copy the local HDMI loop-out display's EDID. If switched to Rx, the extender will copy the remote
display's EDID.
HDMI Out: Connect a local HDMI display.

IR Out: Connect the included IR emitter cable for controlling the source device.

Power LED: This LED will illuminate once power has been connected.

Cat Out: Connect a Cat.5e or Cat.6 cable.

12VDC: Connect the included power supply.

Receiver
HDMI Out: Connect an HDMI display.

IR In: Connect the included IR receiver cable for control of the source device from the display side.

Power LED: This LED will illuminate once power has been connected.

Cat In: Connect the Cat.5e or Cat.6 cable from the transmitter.

English