Publicidad
Idiomas disponibles
Idiomas disponibles
GB
6. Maintenance and inspection
6.1
Safety measures
Important:
i
The operator must provide any protective clothing that may be required.
Who can carry out maintenance and inspection work?
»Normal maintenance work can be carried out by trained operating personnel.
6.2
Maintenance and inspection table
Interval
Assembly
Before use
Floor mounting (accessory)
Inside and outside of boot
As required
cleaner
Housing
monthly
Line/hose system
Hose clamp
6.3
Troubleshooting
Fault
No or not enough water from the
water outlet pipe and the hand
brush
No or little water from the hand
brush, with the dosing lever
open
7. Accessories/spare parts
7.1
Spare parts
12
Action
Check for tight fit
Remove any dirt that has accumulated
Visual check for damage
Check hoses for cracks and porosity, check fittings
for leaks (replace defective parts).
Check for tight fit
Possible cause
Inlet closed or only partially
open
Inlet hose kinked
Hose kinked
B Premium boot cleaner hand brush
Item no. 232.0009.036
C Replacement brush set for stationary brushes
(3 pieces)
B
Item no. 232.0009.041
C
Solution
Open inlet completely
Remove kink
Remove kink
Publicidad
