Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY:
GB
Assembly (Figures 2a+2b)
1.
Loosen the transport lock. Fold the stroller forwards until you hear the locking
levers click into place and see that they have clicked into place.
Rear axle assembly (Figures 3a+3b)
2.
Slide the rear axle onto the rear leg until you hear it click in place. Pull it to ensure
it is latched in place.
Front axle assembly (Figures 4 a + 4b)
3.
Remove the front axle by pushing both knobs in. Slide the front axle through the
front wheel. Press the front wheel into the joint until you hear it click into place.
Check to make sure it is securely in place.
Rear wheel assembly (Figure 5)
4.
Press the wheel onto the axle until you hear it click into placeof the metal pin in
the axle groove.
To remove the wheel, press the locking levers upwards and remove the wheel.
Brake (Figure 6)
5.
To park the baby stroller, press the brake downwards with your foot. To release
the brake, lift the brake with your foot.
Caution: Always make sure the brake is on when the baby stroller is parked.
Adjusting the reclining backrest (Figure 7)
6.
The backrest features through adjustment. It can be adjusted with the cord
drawstring located on the back of the backrest.
Bumper bar assembly (Figures 8a+8b)
7.
Press the bumper bar underneath the catch on the frame until you hear it latch
into place. Check to make sure it is securely in place.
Adjusting the foot rest (Figure 9)
8.
Press the two adjusting buttons and move the footrest into the desired position.
Harness system
9.
First, place the crotch and the pelvis belt around the child and lock in place. Then
place the shoulder harness over the shoulders and hook it in the pelvis belt. Now
adjust the tightness of the belt to the specific needs of your child. Make sure that
the harness system is always strapped on and secure when you child is the baby
stroller.
18
Publicidad
