Kukirin C1 Pro Manual De Instrucciones página 10

4.Installation steps
1.Handlebar installation steps
1.Remove the kit, accessories and mounting tools from the accessories.
2.Insert the gripping hole into the telescopic riser.
3.Use the M5 cylindrical head screw to lock both sides at the same time, and after
screwing to a certain extent, adjust the direction of the handle tube and the front wheel to
check whether it is vertical; The upper surface of the force should be aligned with the
upper surface of the telescopic riser; Then tighten both sides of the screw until the handle
is stable and does not shake.
4. Remove the lifting spacer and lifting screw and secure and screw above the telescopic
riser.
7