Publicidad
Idiomas disponibles
Idiomas disponibles
D H
4 5 1 5
Keep Working
TOOL CHANGING
Functional Description
Read ail safety warning and all instruction. Failure to follow the warning and instruction may result in electric shock, fire and/or
serious injury.
Intended Use
The power tool is intended for chiseling work in concrete, brick masonry and asphalt as well as for driving in and compacting,
when using the respective accessories
ASSEMBLY
Auxiliary handle
The tool must be supported with the auxiliary handle 3, which can be swiveled 360°. To re-set and/or swivel the handle, loosen
the hand grip 9, move the handle to the desired position along the barrel and securely retighten the hand grip.
Changing the Tool
By installing and removing accessories, please make sure that the tool is OFF, and the cord should not be plugged in. Pull out
the stop pin 1 and swivel it to make the flange towards the direction of motor housing.
Insert accessory into the tool holder through the dust shield, while twisting and pushing inward until it locks into place. Then swivel
the stop pin back.
FIGURE A
KEEP WORKiNG
09
Publicidad
