Publicidad
Idiomas disponibles
Idiomas disponibles
D H
4 5 1 5
Keep Working
Re-sharpening
Sharpen chiseling tools using grinding wheel (e.gceramic bonded corundum wheel)with a steady supply of water, Reference valu-
ces are shown in the figure. Take care that no annealing coloration appears on the cutting edges; this impairs the hardness of
the chiseling tools.
For forging heat the chisel to between 850 and 1050°C (right red to yellow)
For hardening, heat the chisel to approx 900°C and quench in oil. Then anneal in an oven for approx, one hour at 320°C.
Maintenance and Cleaning
Before any work on the machine itself, pull the mains plug.
For safe and proper working, always keep the machine and the ventilation slots clean.
A damaged dust protection cap should be changed immediately. We recommend having this carried out by an after-sales service.
Lubrication
The power tool is oil-lubricated. An oil chang is required only within the scope of maintenance or repair through an authorized
after-sales service agent for ELITE power tools. in this it is absolutely required to use the specified ELITE oil If the power tool
should fail despite the care taken in manufacturing and testing procedures, repair shoulu be carried out by an after-sales service
center for power tools.
CARING FOR THE ENVIRONMENT!
It must not be disposed of with household waste! This product contains electrical or electronic components that must be recycled.
Bring the product for recycling at the sites assigned to your area, eg, the local recycling station.
Environmental Protection
Recycle raw materials instead of disposing as waste.
Machine, accesssories and packaging should be sorted for environment-friendly recycling.
These instructions are printed without chlorine.
The plastic components are labelled for categorized recycling.
KEEP WORKiNG
11
Publicidad
