Project Source KPS-103-BG Instrucciones De Montaje página 4

INSTALLATION INSTRUCTIONS
1. Shut off the water at the supply valves under the sink or at the
main water supply. Disconnect the supply lines. Remove the
existing faucet from the sink.
Clean and dry the surface area where the new faucet will be
mounted.
2.
To install with the optional deckplate for a 3-hole sink, skip to
Step 3.
Carefully insert the integrated water supply lines (2.1) and shank
(2.2) on the faucet body (A) through the mounting hole in the sink
(2.3). Skip to Step 4.
NOTE: If drilling a brand new hole in your sink or countertop,
please ensure correct hole diameter of 1.375" (1-3/8") to fit
threaded shank (2.2) diameter.
3. OPTIONAL DECKPLATE INSTALLATION:
Apply a thin bead of silicone to the underside of the gasket
(C). Place the gasket (C) and deckplate (B) over the mounting
holes in the sink, aligning the center holes in the gasket (C) and
deckplate (B) with the center mounting hole in the sink (3.1).
Carefully insert the integrated water supply lines (3.2) on the faucet
body (A) through the hole in the deckplate (B), gasket (C), and the
mounting hole in the sink (3.1) until the faucet sits on top of the
deckplate (B).
4
1
2
2.3
3
3.1
A
2.2
2.1
A
3.2
B
C