Vapormed Mighty+ Medic Modo De Empleo página 61

5 C O M M I S S I O N I N G A N D O P E R AT I O N
5.4.3.2 Quick Charge
(if supported by the Charger)
X Connect the Vaporizer to the USB-C Supercharger.
Ö Vibration and lighting up of the display.
Ö Ascending quickly flashing charge status fields.
Ö As soon as the battery is fully charged, all six charge status fields
are visible.
Ö If the connected Charger also supports pass-through operation, „dct"
appears on the second line of the display for three seconds after
connection (see Chapter 5.5 „Mains Operation").
5.4.3.3 Charging with a low Power Charger
X Connect the Vaporizer to the USB Charger.
Ö Vibration and lighting up of the display.
Ö Display indication in the second line: „SLO".
X Use a more powerful charger.
5.4.4 End of the Charging Process
X When the charging process is finished, first disconnect the USB-C Super-
charger from the mains supply and then from the Vaporizer.
5.5 Mains Operation (only possible with USB-C Supercharger)
X When using the USB-C Supercharger included in the scope of delivery, the
Vaporizer can be operated with a completely discharged battery.
Ö Irrespective of whether the Vaporizer is switched on or off, "dct" is shown
on the second line of the display for three seconds after connecting the
USB-C Supercharger.
Ö The battery is not charged during this.
Ö The Vaporizer switches off when the mains supply is disconnected if the
battery is completely discharged.
62